Mobi Technologies 70061 CAMERA OPERTATION & INSTALLATION Power ON/OFF, Channel Selection

CAMERA OPERTATION & INSTALLATION

Power ON/OFF

Use the Power ON/OFF sliding switch to turn ON/OFF the unit (see #21 on page 3).

Channel Selection

Press the Channel Selection Switch (￿g. 17) on the Camera to choose which channel you want the unit to transmit on. The chan- nel indicator LED (￿g. 16) will illuminate which channel the Camera is set to (A or B). Make sure to set the additional camera to a di￿er- ent channel than the ￿rst camera. For instance, if the ￿st Camera is set to Channel A, then the additional should be set to Channel B.

Voice Activation

To Activate: Select the VOX setting on the Function Activation Switch (18)on the left side of the Camera unit. When the sound level within the area surrounding the unit reaches a preset level, the Camera will begin transmitting the image and sound to the Monitor.

NOTE: The LCD on the Monitor unit will automatically switch to standby mode if no signal is received from the Camera. To Deacti- vate: Select the CAMERA setting on the Function Activation Switch of your camera.

Automatic Infra-Red Night Vision

The infra-red night vision feature will switch on automatically during darkness or periods of very low levels of light and a black and white image will be displayed on the monitor. Once the feature is activated objects must be within 6 ft/ 2 m of the camera to be seen on the monitor.

7