PROBLEMS & SOLUTIONS
Problem | Solution |
Poor reception | • Battery Levels (check Led indicator: |
| Full Power - Green; Low Power - |
| Orange) |
| • The camera may not be set to |
| Camera Mode. |
| • Wrong Channel (Please note the |
| monitor will return to Channel A |
| automatically after power off) |
Only Black & White | • Camera has switched to “Infrared |
picture displayed | Night Version” mode. |
Units Continually | • Check to see if the scanning feature |
Loses Signal | is enabled |
| • Check to see if Camera is in VOX |
| mode |
| • Make sure both cameras are not on |
| the same channel. Each camera |
| should be set to its own channel to |
| ensure your unit is monitoring two |
| rooms. |
Unit does not | • AC Adapter has not been connected. |
turn on | • Unit has not been switched on. |
| • AC Adapter is plugged into AV jack. |
| Make sure to connect the power |
| plug to the DC jack. |