Changing the Bulb, Troubleshooting, Maintenance

CHANGING THE BULB

Disconnect the machine from the power supply be removing the plug from the main socket. Replace the bulb with the same type rated

1-(1)

LED Φ5MM DC3V 0.6W

+ -

1-(2)

+ -

1.Wipe the machine with clean cloth.

2.Remove bobbin cover and take out the bobbin, place the bobbin cover back after cleaning with a small brush.

3.Keep the machine away from high temperatures. 4.Do not drop.

5.Please turn to the instruction manual when changing the accessories, and make sure these are installed correctly.

Rethread the upper thread and bobbin

Image 14

Contents

Why is the thread looping/bunching under my fabric? Why is my machine skipping stitches? Introduction Principal Parts of the Machine Machine Front View Table of ContentsName of Parts Principal Parts and What They do Principal Parts of the Machine Machine Back View Accessories Standard Accessories Removing / Installing Extension BED Connecting Machine to Power Source Presser Foot Lifter Needle / Fabric / Thread GuideInserting / Changing Needles Removing the Presser Foot Removing / Attaching the Presser FootWinding the Bobbin Attaching the Presser Foot Inserting the Bobbin Threading the Upper Thread Straight Stitching Threading the Upper Thread Raising the Bobbin ThreadChoosing a Stitch Pattern How Does Tension Work? Thread TensionReverse Sewing / Cutting the Thread Tension Test Appliqué ZIG-ZAG StitchingBlind HEM Stitching Mending a Tear Multi ZIG-ZAG StitchingDarning Plate Elastic Insertion How to solve common problems Solution TroubleshootingMaintenance Changing the Bulb