INSTALLATION & SET UP
Installing Batteries
Your MobiCam AV can be powered by either using the supplied AC power adaptors or batteries.
Using Batteries:
a)Remove the battery door (12, 26) at the bottom/ back of each unit by loosening the
b)Both units use 1.5 volt AA size batteries. Always use batteries of the same brand and age (alkaline recommended). Insert 4 AA batteries into the camera and 6 AA batteries into the monitor.
c)Replace the covers by aligning the tabs with the tab holes and tightening the
CAUTION: Remove batteries immediately once they run out of power and dispose of them properly. Do not use batteries while using the AC adaptor for extended periods of time as this might cause battery leakage.
Using AC Adaptors:
a)Insert the AC adaptor into the DC Jack (9, 23) of either unit (The AC adaptors are the same for both the Camera and Monitor).
b)Plug the AC adaptor plug into a standard AC power outlet.
6