Viking F20941B manual Baking Tips, Souffles, yeast breads, quick

convection bake

two-element bake

Operation

Baking

BAKE (Two-Element Bake)

Full power heat is radiated

from the bake element in the

bottom of the oven cavity and

supplemental heat is radiated

from the broil element. This

function is recommended for

single rack baking. Many cookbooks contain recipes to be cooked in the conventional manner. Conventional baking/

roasting is particularly suitable for dishes that require a high temperature. Use this setting for baking, roasting, and casseroles.

CONV BAKE (Convection Bake)

The bottom element operates

at full power, and the top broil

element operates at

supplemental power. The

heated air is circulated by the

motorized fan in the rear of the

oven providing a more even heat distribution. This even circulation of air equalizes the

temperature throughout the oven cavity and eliminates the hot and cold spots found in conventional ovens. A major benefit of convection baking is the ability to prepare food in quantity using multiple racks—a feature not possible in a standard oven.

When roasting using this setting, cool air is quickly replaced, searing meats on the outside and retaining more juices and natural flavor on the inside with less shrinkage. With this heating method, foods can be baked and roasted at the same time with minimal taste transfer, even when different dishes are involved, such as cakes, fish or meat. The hot air system is especially economical when thawing frozen food. Use this setting for baking and roasting.

TRU CONV (TruConvec™)

The rear element only operates
at full power. There is no direct
heat from the bottom or top
elements. The motorized fan in
the rear of the oven circulates
air in the oven cavity for even
heating. Use this setting for
foods that require gentle
cooking such as pastries,	TruConvec™
souffles, yeast breads, quick

breads and cakes. Breads, cookies, and other baked goods come out evenly textured with golden crusts. No special bakeware is required. Use this function for single rack baking, multiple rack baking, roasting, and preparation of complete meals. This setting is also recommended when baking large quantities of baked goods at one time.

Baking Tips

•Make sure the oven racks are in the desired positions before turning the oven on.

•DO NOT open the oven door frequently during baking. If you must open the door, the best time is during the last quarter of the baking time.

•Bake to shortest time suggested and check for doneness before adding more time. For baked goods, a stainless steel knife placed in the center of the product should come clean when done.

•Use the pan size and type recommended by the recipe to ensure best results. Cakes, quick breads, muffins, and cookies should be baked in shiny, reflective pans for light, golden crusts. Avoid the use of old, darkened pans. Warped, dented, stainless steel and tin- coated pans heat unevenly and will not give uniform baking results.

Operation

22 23