OPERATING
INSTRUCTIONS
1.Fill the beverage bottle with chilled water up to the indicated “Water Fill Line."
2.Insert the carbonator head into the bottle and screw down firmly until it is tightly fitted to the bottle (fig. a).
3.Use the toggle to make sure the safety window is fully open on the charger chamber.
4.Insert a disposable CO2 charger into the open window of the charger chamber, narrow end facing down (fig. b), and ensure the charger is inserted firmly in place by gently pushing the disposable CO2 charger back until you hear a click.
NOTE: Only use Cuisinart CO2 Chargers powered by Soda Sparkle.
5.Place the correctly filled beverage bottle with attached carbonator head in an upright and stable position on a clean, flat surface. Lower the charger chamber down onto the carbonator head to engage the activating thread (fig. c). Screw the charger chamber clockwise onto the carbonator head. The safety window will automatically close and lock prior to piercing the CO2 charger.
6.Continue to firmly turn the charger chamber clockwise until you can not tighten anymore and the CO2 charger is pierced. You will see the CO2 release into the bottle and hear a hissing sound and small associated release of excess CO2 through the carbonator head safety release valve – a normal part of the carbonation process.
NOTE: Wait at least 30 seconds for full carbonation to take place.
7.Slowly unscrew and remove the charger chamber from the carbonator head. Slide the safety
fig. a |
| fig. b |
|
|
|
fig. c |
| fig. d |
|
|
|
fig. e |
| fig. f |
|
|
|
window open using the slider button and eject the used CO2 charger through the window by pushing your index finger through the hole provided.
8.Shake the bottle thoroughly for
5 seconds (fig. d) to complete the carbonation process.
9.Slowly unscrew the carbonator head and remove, then enjoy your sparkling water.
NOTE: Once opened, use only the standard bottle cap to reseal the bottle. The sparkling nozzle cap should be used only when carbonating.
If you would like, you can add a natural flavor stick to your glass of sparkling water for a refreshing, flavored soda (fig. e).
NOTE: Never pour in flavor before carbonating.
10.The supplied bottle cap will maintain a residual pressure and can be placed on the bottle to keep the contents from going flat (fig. f).
For Best Results
•Use only chilled water for carbonation.
•Always fill bottle to maximum fill
5