Operation

1.Place the motor base of your Cuisinart® PowerEdge® 700-Watt Blender onto a flat, sturdy surface. It is important that the surface be clean and dry. Assemble the blender by following the Assembly instructions. Once the jar is assembled and is in position on the motor base, plug the Cuisinart® PowerEdge® 700-Watt Blender into an electrical outlet.

2.Add all necessary ingredients to the blender jar, and replace the cover. Make sure that the triangle icon in the cover is aligned with the pour spout. This will ensure smoother lifting of the lid. You may add more ingredients by lifting the measured pour lid and dropping ingredients through the fill area. Replace the measured pour lid after adding ingredients. Do not put hands in blender jar with blender plugged in.

Note: To remove blender jar cover, lift edge of cover upward. Lifting measured pour lid will not remove cover.

3.Start Blending: Press the On/Off button. The red LED indicator light will illuminate and flash, indicating that the blender is turned on but no speed has been selected. This is Standby mode.

4.Choose Blending Speed: Press desired function to determine the speed at which you would like to blend the ingredients. The indicator light for the activated speed will glow. The blender will now be functioning at the desired speed. It is possible to switch speeds without pressing the On/ Off button by simply pushing another speed button.

Note: The Count Up™ Timer will begin counting when the desired speed button is pushed. When you switch into a pre-programmed speed, the timer will reset to support the new command.

5.Pulse Mode: The Pulse mode allows you to create a burst of power for quick, efficient blending. To use the Pulse function, push the

On/Off button and the red LED indicator light will flash. Push the Pulse button and the Pulse LED indicator light will blink. Push and release the desired speed button. Repeat as desired. While pulsing, the LED indica- tor Pulse light will remain solid while the function button is pressed. The Pulse function can be used to break apart larger pieces of food or to control the texture of food when chopping. The Pulse function is also effective in starting the blending process when you do not want continu- ous power, or when processing items that do not require an extended amount of blending.

Note: The timer will count when you push Pulse and hold down the func- tion button. The timer will pause when you release the function button. It will reset if you press Pulse again.

6.To reset the unit: This appliance features an advanced resettable thermal fuse. In the event of an overload condition, the unit will shut down to protect the motor from overheating. To reset the appliance when this happens, unplug the unit and let it cool for a minimum of 15 minutes. Then, reduce the contents of the blender jar and/or clear any jams. Restart the unit as noted in the operating directions.

7.To Pause or Stop Blending Process:

a)To Pause Blending Process: Push the button corresponding to

the speed at which you are currently blending. For example: If you are blending on High speed, push the High speed button and the blender will stop blending but the unit will remain on.

Note: By pausing the blending process, you will also pause the timer. The timer will pause until you start blending again.

b)To Stop the Blending Process: Push the On/Off button when you are finished with your recipe and would like to turn the blender off.

Note: When you push the On/Off button, to power the blender off the timer will stop counting and the LCD display will be off. When the blender is turned back on and a speed button is pushed, the timer will begin to count from 0:00.

8.Timing Your Recipes: The PowerEdge® 700-Watt Blender features a

3-minute Count-Up™Timer so that you can time your recipes and guar- antee perfect results. The timer begins counting from 0 as soon as you push your desired speed: High, Low, Pulse, Purée or Soups & Sauces. The timer will continue to count up even if you change speeds during blending. You can pause the timer by pausing the blending process. Do this by pushing the button corresponding to the speed at which you are currently blending. For example: If you are blending in Low speed and you push the Low speed button, the blender will stop blending and the timer will stop counting, but the unit will remain on. To continue blending and timing your recipe, push the function chosen again. The timer will also stop counting when it reaches 3:00 minutes, and an audible chime will sound. The blender will go into standby mode when the timed cycle is finished. The timer will reset itself when the On/Off button is pushed, a different speed is selected or a pre-programmed function is engaged.

9.Pre-Programmed Recipes: Smoothie and Ice Crush are both programmed based on extensive testing in our kitchen. As part of their programming, the blender will pause between burst and cycles. This is normal and by design.

a)Start Smoothie by powering the unit On and pressing Smoothie. The LED backlight will illuminate and a 30-second count-up program will begin. Not smooth enough for your liking? After the cycle stops, the unit will go into standby. Press the smoothie button again to start a

CBT-700 Series specifications

The Cuisinart CBT-700 Series blender stands out as a versatile kitchen appliance designed to cater to diverse blending needs. This powerful blending machine combines advanced technologies and user-friendly features that make it a preferred choice among both amateur cooks and professional chefs.

At the heart of the CBT-700 Series is its robust motor, typically rated at 1,200 watts. This impressive power enables the blender to handle tough ingredients with ease, whether you're making smoothies, purees, or soups. Its durability is complemented by a sturdy stainless steel blade assembly, engineered to provide a flawless blending experience while resisting dullness over time.

One of the standout features of the Cuisinart CBT-700 is its innovative Control Dial, which allows users to select from multiple speeds effortlessly. This control enables precision blending, ensuring that ingredients are processed to the desired consistency with minimal effort. Additionally, the model contains pre-programmed settings for common recipes, enabling users to achieve optimal results with just a touch of a button.

The blender’s 56-ounce BPA-free jar is designed not only for large capacities but also for easy pouring and handling. The ergonomic design of the jar ensures that users can serve their blended creations without spills or mess. The lid is equipped with a secure locking mechanism and a removable measuring cap for adding ingredients during the blending process without interruptions.

Cuisinart emphasizes safety with the CBT-700 Series, incorporating features such as a safety interlock system. This ensures that the blender will not operate unless the jar is properly seated on the motor base, ultimately preventing accidents.

Furthermore, cleaning the Cuisinart CBT-700 is made simpler with its dishwasher-safe components. This characteristic allows users to maintain their appliance with minimal effort, promoting regular use without the hassle of complicated cleaning routines.

Overall, the Cuisinart CBT-700 Series blender embodies a combination of power, versatility, and cutting-edge technology. Ideal for users seeking efficiency and performance in the kitchen, it ultimately stands as a reliable ally in the quest for culinary excellence. Whether blending smoothies for breakfast or crafting sauces for dinner, this blender does it all with style and ease.