Handle Installation | Viking phk30 professional series handle kit

IMPORTANT–Please Read and Follow!	Handle Installation -
	FRCI/FBCI/FWCI Undercounter Refrigeration

•Before beginning, please read these instructions completely and carefully.

•Use caution during assembly to minimize scratches.

•Do not remove permanently affixed labels, warnings or plates from the product. This may void the warranty.

•Please refer to the product Installation Instructions for more information on installing the door panel.

•The installer should leave instructions with the customer who should retain for local inspector’s use and future reference.

Installation with Wooden Full Overlay Custom Door Front

Parts Included

Part	Quantity
Professional Series Handle Tube	(1)
Professional Series End Caps	(2)
1/4” x 1” Phillips Head Screws	(4)
Installation Instructions

Required Tools

Electric Drill

5/16” (.8 cm) Drill Bit

5/8” (1.6 cm) Spade or Forstner Bit (Counterbore) Tape Measure

Phillips Head Screwdriver

Masking Tape and Pencil Rubber Mallet

To Install:

1.	Locate the wooden custom panel.
2.	Using the illustrations on the next page, layout the handle location on the panels. It is
	recommended that masking tape be placed where the four holes will be drilled to help mark
	the hole placement and to prevent any damage to the door when drilling the holes.
3.	The Professional handle will be mounted using (4) of the 1/4” x 1” Phillips head screws
	provided. Using the 5/16”(.8 cm) drill bit, drill completely through the door in the hole

9/16” (1.4 cm)

5/8” (1.6 cm)

29-1/16”

(73.8 cm)

TYP

5/16” (0.8 cm) through-holes with 5/8” x 1/4” counterbore *See section A-A.

1-3/8” (3.5 cm)

5/8” (1.6 cm) Ø x 1/4” (0.6 cm) counterbore

1-3/8”(3.5 cm)

	locations. Using the 5/8” (1.6 cm) bit, counter-bore two holes 1/4” (.6 cm) deep on the
	BACKSIDE of the custom door panel.
4.	Place a handle end cap on both ends of the handle tube. Tap the endcaps firmly into place
	with a rubber mallet ensuring that both endcaps mounting surfaces are parallel.
5.	Align the holes in the endcaps with the holes on the panel and attach the Professional
	handle to the panel using the (4) 1/4” (.6cm) screws provided.

Section A-A

Professional Series Handle

3/4” (1.8 cm)	5/16” (0.8 cm) Ø through-holes
Full Overlay Panel

phk30 professional series handle kit specifications

The Viking PHK30 Professional Series Handle Kit stands out as an essential accessory for professionals and enthusiasts alike, designed to enhance the efficiency and comfort associated with daily tasks. This handle kit has been engineered with the highest precision and attention to detail, ensuring a product that is not only robust but also user-friendly.

One of the key features of the PHK30 is its ergonomic design. The handle is contoured to fit the natural grip of the hand, which significantly reduces fatigue during prolonged use. This ergonomic focus allows users to maintain better control and precision, making it ideal for a variety of applications, whether in construction, automotive work, or hobbyist projects.

The PHK30 is also built with high-quality materials that ensure durability. The handle is constructed from a combination of reinforced polymers and metallic components that can withstand the rigors of professional use. Its robust design ensures that it is resistant to wear and tear, thereby extending the lifecycle of the product. Additionally, the handle is designed to be lightweight, which further enhances the user experience by minimizing the overall strain during operation.

One of the standout technologies incorporated into the PHK30 handle kit is its quick-release mechanism. This innovative feature allows users to swiftly change tools without the need for additional equipment or complicated procedures. This time-saving aspect is invaluable for professionals who need to switch tasks efficiently, making the handle kit suitable for both dynamic job sites and detailed projects.

The versatility of the PHK30 cannot be overstated. It is compatible with a wide array of attachments, making it suitable for a variety of tasks, from simple home repairs to complex mechanical jobs. This adaptability defines the handle kit's role as not just a tool, but a comprehensive solution for professionals.

In summary, the Viking PHK30 Professional Series Handle Kit brings together ergonomic design, durability, innovative quick-release technology, and unmatched versatility. It is a tool designed to meet the rigorous demands of professional tradespeople while ensuring ease of use and comfort, making it an indispensable addition to any toolkit. Whether you are a seasoned professional or an avid DIYer, the PHK30 promises to enhance your efficiency and effectiveness in any task.