Installation, Operation, and Care of
MODEL FP350 FOOD PROCESSOR
SAVE THESE INSTRUCTIONS
GENERAL
The FP350 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables, fruits, or cheese. A worktable, a wall rack, and a wide range of slicer, shredder, and dicing plates are available options.
INSTALLATION
UNPACKING
Immediately after unpacking the FP350, check for possible shipping damage. If the food processor is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, verify that the electrical service agrees with the specifications on the data plate located at the rear of the machine.
Do not lift the food processor with any hinged or extended parts; lift only with one hand on the front carrying handle and the other hand on the rear carrying handle (Fig. 1).
LOCATION
The FP350 should be operated on a suitable counter height surface. A pan (not provided) suitable for kitchen use can be used to capture the product at the exit chute.
ELECTRICAL CONNECTION
WARNING: THE ELECTRICAL CORD HAS A
ELECTRICAL DATA
Model | Volts / Hertz / Phase | Amps |
|
|
|
FP350 | 120 / 60 / 1 | 10 |
|
|
|
– 3 –