1.3 Hardware Installation
Before starting to configure the router, you have to connect your devices correctly.
1.Connect the DSL interface to Internet with a VDSL2 line cable.
2.Connect one port of
3.Connect Phone port to a conventional analog telephone.
4.Connect detachable antennas to the router for Vigor2750 series (n model).
5.Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity.
6.Power on the router.
7.Check the ACT and DSL, LAN LEDs to assure network connection.
(For the detailed information of LED status, please refer to section 1.1.)
Caution: Each of the Phone ports can be connected to an analog phone only. Do not connect the phone ports to the land line jack. Such connection might damage your router.
8 | Vigor2750 Series User’s Guide |
