4.9.2 General Setup
By clicking the General Setup, a new web page will appear so that you could configure the SSID and the wireless channel.
Please refer to the following figure for more information.
Enable Wireless LAN | Check the box to enable the wireless function. |
Show/Hide | Choose Show to make the SSID being seen by wireless clients. |
| Choose Hide to prevent from wireless sniffing and make it |
| harder for unauthorized clients or STAs to join your wireless |
| LAN. |
SSID | It means the identification of the wireless LAN. SSID can be |
| any text numbers or various special characters. The default |
| SSID is "DrayTek". We suggest you to change it. |
Isolate Member | Check this box to make the wireless clients (stations) with |
| the same SSID not accessing for each other. |
Wireless Mode | Choose the wireless mode for this router. At present, only |
| 802.11B/B/N mix is available. |
Channel | It means the channel of frequency of the wireless LAN. The |
| default channel is 11. You may switch channel if the selected |
| channel is under serious interference. If you have no idea of |
| choosing the frequency, please select Auto to let system |
| determine for you. |
| Channel setting will be changed according to the wireless mode |
| selected. |
190 | Vigor2750 Series User’s Guide |
