Draytek 2750 manual 13.2 TR-069, Http//IP address

4.13.2 TR-069

Vigor router with TR-069 is available for matching with VigorACS server. Such page provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here is for CPE to be controlled and managed with VigorACS server. Users need to type URL, username and password for the VigorACS server that such device will be connected. However URL, username and password under CPE client are fixed that users cannot change it. The default CPE username and password are "vigor" and "password". You will need it when you configure VigorACS server.

ACS Settings	Such data must be typed according to the ACS (Auto
	Configuration Server) you want to link. Please refer to
	VigorACS user’s manual for detailed information.
	URL - Type the URL for VigorACS server.
	If the connected CPE needs to be authenticated, please
	set URL as the following and type username and
	password for VigorACS server:
	http://{IP address of
	VigorACS}:8080/ACSServer/services/ACSServl
	et
	If the connected CPE does not need to be authenticated
	please set URL as the following:
	http://{IP address of
	VigorACS}:8080/ACSServer/services/UnAuthAC
	SServlet
	Username/Password - Type username and password for
	ACS Server for authentication. For example, if you want
	to use such CPE with VigorACS, you can type as the
	following:
	Username: acs
	Password: password
Vigor2750 Series User’s Guide	223