Draytek 2750 manual Bad packets transmitted

Tx Pause	Show the counting number of the transmitted pause packet.
Tx 64 Bytes	Display the number of 64-byte frames in good and bad
	packets transmitted.
Tx 65-127 Bytes	Display the number of 65 ~ 127-byte frames in good and
	bad packets transmitted.
Tx 128-255 Bytes	Display the number of 128 ~ 255-byte frames in good and
	bad packets transmitted.
Tx 256-511 Bytes	Display the number of 256 ~ 511-byte frames in good and
	bad packets transmitted.
Tx 512-1023 Bytes	Display the number of 512 ~ 1023-byte frames in good and
	bad packets transmitted.
Tx 1024- 1526 Bytes	Display the number of 1024 ~ 1522-byt frames in good and
	bad packets transmitted.
Tx 1527 Bytes:	Display the number of 1527-byte frames in good and bad
	packets transmitted.
Tx Low	Display the low queue counter of the packet transmitted.
Tx Normal	Display the normal queue counter of the packet
	transmitted.
Tx Medium	Display the medium queue counter of the packet received.
Tx High	Display the high queue counter of the packet received.
Tx Drops	Display the number of frames dropped due to excessive
	collision, late collision, or frame aging.
Tx lat/Exc.Coll.	Display the number of Frames late collision or excessive
	collision Error, which switch transmitted
Auto-refresh	Check it to enable auto-refresh function.
Refresh	Click it to reload the page.
Clear	Click it to clear the counters for all ports.

4.14.6 MAC Address Table

The MAC Address Table contains up to 8192 entries, and is sorted first by VLAN ID, then by MAC address.

Each page shows up to 999 entries from the MAC table, default being 20, selected through the "entries per page" input field. When first visited, the web page will show the first 20 entries from the beginning of the MAC Table. The first displayed will be the one with the lowest VLAN ID and the lowest MAC address found in the MAC Table.

The Start from MAC address and VLAN input fields allow the user to select the starting point in the MAC Table. Clicking the Refresh button will update the displayed table starting from that or the closest next MAC Table match. In addition, the two input fields will assume the value of the first displayed entry, allowing for continuous refresh with the same start address.

The button >> will use the last entry of the currently displayed VLAN/MAC address pairs as a basis for the next lookup. When the end is reached the text "no more entries" is shown in the displayed table, use the l<< button to start over.

Vigor2750 Series User’s Guide 237