When TSPC configuration has been done, the router will start to connect. The connecting page will be shown as below:
When the router detects all the information, the screen will be shown as follows. One set of TSPC prefix and prefix length will be obtained after the connection between TSPC and Tunnel broker built.
Connection Status | It will bring out different pages to represent IPv6 |
| disconnection, connecting and connected. |
Tunnel Information | Display interface name (used to send TSPC prefix), tunnel |
| mode, local endpoint addresses, remote endpoint address, |
| TSPC Prfix, TSPC Prefixlen (prefix length), tunnel broker |
| and so on. |
Tunnel Status | Disconnected - The remote client doesn't connect to the |
| tunnel server. |
| Connecting - The remote client is connecting to the tunnel |
| server. |
| Connected – The remote client has been connected to the |
| tunnel server. |
Activity | Sent - sent to the tunnel (RX bytes). |
| Received - received from the tunnel (RX bytes). |
216 | Vigor2750 Series User’s Guide |
