RX Packets | Displays the total received packets at the LAN interface. |
TX Bytes | Displays the total transmitted bytes at the LAN interface. |
RX Bytes | Displays the total received packets at the LAN interface. |
IPv6 Address | Displays the IPv6 address of the LAN interface. |
WAN Status |
|
IP | Display the IP address of the WAN interface. |
GW IP | Display the IP address of the default gateway. |
Mode | Display the type of WAN connection (e.g., PPPoE). |
Up Time | Display the total uptime of the interface. |
IPv6 Address | Display the IPv6 address of the LAN interface. |
Primary DNS | Display the primary DNS server address for WAN interface. |
Secondary DNS | Display the secondary DNS server address for WAN interface. |
TX Packets | Display the total transmitted packets at the WAN interface. |
RX Packets | Display the total number of received packets at the WAN interface. |
TX Bytes | Display the total transmitted bytes at the WAN interface. |
RX Bytes | Display the total received packets at the WAN interface. |
Profile | Display current VDSL profile used. |
State | Display the state of VDSL line. |
Up Speed | Display the maximum up speed of VDSL line. |
Down Speed | Display the maximum down speed of VDSL line. |
SNR Upstream | Display the |
SNR Downstream | Display the |
Note: The words in green mean that the WAN connection of that interface is ready for accessing Internet; the words in red mean that the WAN connection of that interface is not ready for accessing Internet.
2.6 Saving Configuration
Each time you click OK on the web page for saving the configuration, you can find messages showing the system interaction with you.
Ready indicates the system is ready for you to input settings.
Settings Saved means your settings are saved once you click Finish or OK button.
30 | Vigor2750 Series User’s Guide |
