Vigor2750 Series User’s Guide 209
Username Type the name obtained from the broker. “vigor2750” is a
default username applied from
http://go6.net/4105/register.asp. It is suggested for you to
apply another username and password.
Password Type the password assigned with the user name.
Confirm Password Type the password again to make the confirmation.
Tunnel Broker Type the address for the tunnel broker IP, FQDN or an
optional port number.
Tunnel Mode IPv6-in-IPv4 Tunnel- Let the broker choose the tunnel
mode appropriate for the client.
IPv6-in-IPv4 (Native) - Request an IPv6 in IPv4 tunnel.
IPv6-in-IPv4 (NAT Traversal - Request an IPv6 in UDP
of IPv4 tunnel (for clients behind a NAT).
Auto-reconnect Delay After passing the time set here, the client will retry to
connect in case of failure or keepalive timeout.
0 means not retry.
Keepalive Yes – Keep the connection between TSPC and tunnel
broker always on. TSPC will send ping packet to make
sure the connection between both ends is normal.
No - The client will not send keepalives.
Keepalive_interval Type the time for the interval between two keepalive
messages transferring from the client to the broker.