Draytek manual For Vigor2750n, Wlan

1.2.2 For Vigor2750n

LED	Status	Explanation
ACT	Blinking	The router is powered on and running
(Activity)		normally.
	Off	The router is powered off.
HPA	On	Hardware NAT is enabled.
(Hardware	Off	Hardware NAT is disabled.
Packet
Accelerate)
DSL	On	The DSL port is connected.
	Blinking	The router is ready.
	(Slowly)
	Blinking	The connection is training.
	(Quickly)
LAN1/2/3/4	On	The port is connected with 1000Mbps.
	(Green)
	Blinking	The data is transmitting.
	(Green)
	On	The port is connected with 100Mbps.
	(Orange)
	Blinking	The data is transmitting.
	(Orange)
USB1/2	On	A USB device is connected and active.
VPN	On	The VPN tunnel is active.
QoS	On	The QoS function is active.
WLAN	On	Wireless access point is ready.
WPS Button	On	Press this button for 2 seconds to wait
		for client device making network
		connection through WPS. When the
		LED lights up, the WPS connection
		will be on.
	Off	The WPS is off.

Interface	Description
WLAN	Press the button once to enable (WLAN LED on) or
	disable (WLAN LED off) wireless connection.
DSL	Connector for accessing the Internet.
LAN (1-4)	Connectors for local network devices.
USB (1-2)	Connector for USB storage device (Pen
	Driver/Mobile HD) or printer or 3G backup.

4 Vigor2750 Series User’s Guide