After finishing the settings here, please click Next.
PPTP/L2TP
if you click PPTP/L2TP as the protocol, please manually enter the Username/Password provided by your ISP and all the required information.
User Name | Assign a specific valid user name provided by the ISP. |
Password | Assign a valid password provided by the ISP. |
Server Address | Specify the IP address of the PPTP server. |
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address | Type the IP address if you choose Static IP as the WAN IP |
| network setting. |
Subnet Mask | Type the subnet mask if you chose Static IP as the WAN IP. |
Redial Policy | If you want to connect to Internet all the time, you can choose |
| Always On. Otherwise, choose Connect on Demand. |
Idle Time Out | Set the timeout for breaking down the Internet after passing |
| through the time without any action. When you choose |
| Connect on Demand, you have to type value here. |
MTU Size | It means Max Transmit Unit for packet. The default |
| setting is 1442. |
Vigor2750 Series User’s Guide | 23 |
