Editing a QCE
Click 
to modify the settings of an existing QCE on this page.
Moving Up/Down a QCE
Click 
and 
to move a QCE up and down.
Deleting a QCE
To delete a QCE in the list, simply click 
of that one. It will be removed immediately.
3.5.5 Ports Priority
This page allows you to configure QoS settings for each port. The classification is controlled by a QCL (Quality Control List) that is assigned to each port. A QCL consists of an ordered list of up to 12 QCEs (Quality Control Entry). Each QCE can be used to classify certain frames to a specific QoS class. This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. Frames not matching any of the QCEs are classified to the default QoS class for the port.
Port | Indicate the interface for DSL port. |
Default Class | Use the drop down list to choose the priority for each port. |
QCL | Use the drop down list to choose the QCL number defined in |
| QoS Control List for the port. |
Vigor2750 Series User’s Guide | 67 |
