4.10 USB Application
USB diskette can be regarded as an FTP server. By way of Vigor router, clients on LAN can access, write and read data stored in USB diskette. After setting the configuration in USB Application, you can type the IP address of the Vigor router and username/password created in User>>User Configuration on the FTP client software. Thus, the client can use the FTP site (USB diskette) through Vigor router.
4.10.1 USB General Settings
This page will determine the number of concurrent FTP connection and default charset for FTP server. At present, the Vigor router can support USB diskette with versions of FAT16 and FAT32 only. Therefore, before connecting the USB diskette into the Vigor router, please make sure the memory format for the USB diskette is FAT16 or FAT32. It is recommended for you to use FAT32 for viewing the filename completely (FAT16 cannot support long filename).
Enable FTP | Check this box to enable FTP connection. |
Enable Disk Sharing | Check this box to share the information on USB disk. |
Workgroup Name | Type the name for FTP users for accessing into FTP server |
| (USB diskette). Be aware that users cannot access into USB |
| diskette in anonymity. Later, you can open FTP client software |
| and type the username specified here for accessing into USB |
| storage diskette. |
4.10.2 FTP User Management
This page allows you to change user setting for USB storage disk. Before modifying settings in this page, please insert a USB diskette and configure settings in User>>User Configuration first. Otherwise, an error message will appear to warn you.
Click the name link under User Name to open the setting web page.
Vigor2750 Series User’s Guide | 203 |
