4.3.4 VLAN

Virtual LAN function provides you a very convenient way to manage hosts by grouping them based on the physical port. You can also manage the in/out rate of each port. Go to LAN page and select VLAN. The following page will appear. VLAN function is enabled in default.

Note: For the VALN feature in LAN is port-based, the available numbers for PVLAN ID can be 1-4.

Add New Private VLAN Click this button to add a new private VLAN. The router allows you to add up to 4 VLAN.

To add or remove a VLAN, please refer to the following example.

1.VLAN 1 is consisted of hosts linked to P1 ~ P4.

2.After checking the box to enable VLAN function, you will check the table according to the needs as shown below.

Vigor2750 Series User’s Guide

139

Page 149
Image 149
Draytek 2750 manual 139