HP 640n Print Server manual Error messages, DLC/LLC protocol information

Table 8-11 AppleTalk configuration information

Message	Description
STATUS	Current AppleTalk configuration status.
	READY Print server is awaiting data.
	DISABLED Manually disabled.
	INITIALIZING Registering the node address or name. Additional status messages
	might be displayed.
	An error code and message is displayed if the print server is not ready. For more
	information, see Table 8-13 Error messages on page 153.
NAME	Printer name on the AppleTalk network. A number after the name signifies this is the
	Nth instance of this name.
ZONE	Name of the AppleTalk network zone on which the printer is located.
TYPE	Printer type advertised on the network. Two types can display.
NETWORK NUMBER	NETWORK NUMBER Network number on which the HP Jetdirect print server is
NODE NUMBER	currently operating.
	NODE NUMBER Node number that the print server chose for itself as part of its
	initialization sequence.
	NOTE: The AppleTalk phase 2 (P2) parameter is pre-configured on the HP Jetdirect
	print server.

DLC/LLC protocol information

Information in this section of the HP Jetdirect configuration page is described in Table 8-12 DLC/LLC configuration information on page 152.

Table 8-12 DLC/LLC configuration information

Message	Description
STATUS:	Current DLC/LLC protocol status.
	READY Print server is awaiting data.
	DISABLED Manually disabled.
	INITIALIZING Registering the node address or name. Additional status messages
	might display.
	An error code and message is displayed if the print server is not ready. For more
	information, see Table 8-13 Error messages on page 153.

Error messages

Error codes and messages that might appear in the Status sections of the HP Jetdirect configuration page are described in Table 8-13 Error messages on page 153.

152 Chapter 8 HP Jetdirect configuration pages ENWW