HP 640n Print Server manual Novell/NetWare parameters, AppleTalk protocol information

Novell/NetWare parameters

Information in this section of the HP Jetdirect configuration page is described in Table 8-10 Novell/ NetWare configuration information on page 151. For error messages, see Table 8-13 Error messages on page 153.

Table 8-10 Novell/NetWare configuration information

Message	Description
STATUS	Current Novell NetWare configuration status.
	READY Print server is awaiting data.
	DISABLED Manually disabled.
	INITIALIZING Registering the node address or name. Additional status messages
	might be displayed.
	An error code and message is displayed if the print server is not ready. For more
	information, see Table 8-13 Error messages on page 153.
NODE NAME	Queue Server Mode Print server name, which must match a valid print server on the
	appropriate NetWare file server. The default name is NPIXXXXXX, where XXXXXX is
	the last six digits of the LAN hardware (MAC) address.
	Remote Printer Mode Network printer name. The default name is NPIXXXXXX.
NETWARE MODE	Mode used by the HP Jetdirect print server.
	QUEUE SERVER Receives data directly from the queue.
	REMOTE PRINTER Print server emulates a Novell NetWare remote printer. (The
	printer number normally follows this parameter.)
	If the printer is not configured, this field displays QUEUE SERVER.
NDS TREE NAME	Name of the Novell Directory Services (NDS) tree for this printer. NDS is a database
	of objects on a NetWare network organized in a hierarchical tree structure.
	Not Specified (or blank) NDS is disabled.
NDS CONTEXT	Fully qualified NDS name where the HP Jetdirect print server object resides in the
	NDS tree. For example:
	CN=lj_pserver.OU=support.OU=mycity.OU=mycompany
	Not Specified (or blank) NDS is disabled.
ATTACHED SERVER	HP Jetdirect discovery method [NSQ] (Nearest Service Query) or [GSQ] (General
	Service Query) and the name of the proxy file server used to locate the configured
	bindery servers.
	Not Specified (or blank) A NetWare server is not configured.
SAP INTERVAL	Time interval in seconds that the print server waits between SAP broadcasts on the
	network. The default is 60 seconds.

AppleTalk protocol information

Information in this section of the HP Jetdirect configuration page (Ethernet only) is described in Table 8-11 AppleTalk configuration information on page 152. For error messages, see Table 8-13 Error messages on page 153.

ENWW HP Jetdirect configuration page 151