Table 5-6 Manage Custom Services page (continued)
Item | Description |
|
|
Service Port | For TCP or UDP, select the ports for this custom service to use on the local printer/ |
| MFP, and the remote hosts. The default selection is Any Port. |
| Depending on the service, select Port Range or Specific Port, then enter the port |
| range or port in the fields provided. |
|
|
ICMP Message Type | For ICMPv4 or ICMPv6, enter the ICMP message type number to use by the service. |
| ICMP does not use ports. Instead, it uses |
| NOTE: ICMP messages are typically used for error, control or information |
| messages between network hosts. |
|
|
Add | Add the custom service to the Configured Custom Services list. |
|
|
Configured Custom Services | Custom services that were configured. |
|
|
Delete | Select the service to delete and click Delete. You cannot delete a custom service that |
| is specified for use by an active service template. |
|
|
Step 3: Specify Action
Select an action for the print server for the addresses and services specified for this rule. Available actions depend on whether IPsec is supported.
●Allow traffic. If IPsec is supported, allow traffic to pass without IPsec protection.
●Drop traffic. Do not process (discard) the specified IP traffic.
●Require traffic to be protected with an IPsec/Firewall policy. If IPsec/Firewall features are supported, you are prompted to select or configure an IPsec template to be applied to the specified IP traffic.
Specify IPsec/Firewall Template
Any prior IPsec templates (for example, for other rules) are listed in the IPsec/Firewall Templates field. Because IPsec templates are network dependent, predefined factory default templates are not supplied.
●If the list is empty, the Create IPsec Template page appears instead, so that you can create a template.
●If a desired IPsec template is not in the list, click New to create a custom template using the Create IPsec Template page.
To view or delete a listed template, select it and click View or Delete as appropriate.
After an IPsec template is added to the list and selected, click Next to complete the rule.
ENWW | HP Jetdirect IPsec/Firewall wizard 113 |
