Table 8-4 Security Settings (continued)
Message | Description |
|
|
Access List | (IPv4 only) Access control list is set on the HP Jetdirect print server. The list specifies |
| the IP address of individual systems, or IP network of systems, that are allowed |
| access to the print server and device. |
| Specified Host access list is set. |
| Not Specified Host access list is not set. All systems are allowed access. |
|
|
Secure Web Configuration | Use encrypted communications between a browser and the HP Embedded Web |
| Server. |
| Optional (HTTPS/HTTP) Allows |
| ports, as well as encrypted communications using HTTPS. |
| HTTPS Required Allow only encrypted communications on HTTPS. |
|
|
Assessment | When enabled (the default), print servers attempting connection to network resources |
| must be in full compliance with corporate governance policy. |
|
|
Assessment State | Indicates whether assessment is Enabled or Disabled. |
|
|
DHCP Enforcement | Use DHCP as the transport method for moving assessment data. |
|
|
802.1X Enforcement | Use 802.1X to transport assessment data. |
|
|
Policy Changes Poll Interval | Number of days to wait before checking the assessment server for changes. |
|
|
JD Config Changes Poll Interval | Number of hours to wait before checking the assessment server for device |
| configuration changes. |
|
|
Primary Address/Host Name | IP address or host name of the primary assessment server. |
|
|
Primary Port | Port number of the primary assessment server. |
|
|
Backup Address/Host Name | IP address or host name of the backup assessment server. |
|
|
Backup Port | Port number of the backup assessment server. |
|
|
Network Statistics
Information in this section of the HP Jetdirect configuration page is described in Table
Table 8-5 Network Statistics
Message | Description |
|
|
TOTAL PACKETS RECEIVED | Total number of frames (packets) received by the HP Jetdirect print server without |
| error. Includes broadcast, multicast packets, and packets specifically addressed to |
| the print server. Does not include packets specifically addressed to other nodes. |
|
|
UNICAST PACKETS RECEIVED | Number of frames specifically addressed to this HP Jetdirect print server. Does not |
| include broadcasts or multicasts. |
|
|
BAD PACKETS RECEIVED | Total number of frames (packets) received with errors by the HP Jetdirect print |
| server. |
|
|
TOTAL PACKETS TRANSMITTED | Total number of frames (packets) transmitted without error. |
|
|
146 Chapter 8 HP Jetdirect configuration pages | ENWW |
