HP 640n Print Server manual AppleTalk

Table 4-10IPX/SPX tab settings (continued)

Item	Description
IPX/SPX Frame Type	IPX/SPX frame type to use on your network. After a frame type is configured, all others are
	counted and discarded.
	● All Frame Types (Auto) Sense all types and configure the first one detected (default).
	● Ethernet 802.3 (EN_8023) Use IPX over IEEE 802.3 frames.
	● Ethernet II (EN_II) Use IPX over Ethernet frames.
	● Ethernet 802.2 (EN_8022) Use IPX over IEEE 802.2 with IEEE 802.3 frames.
	● Ethernet SNAP (EN_SNAP) Use IPX over SNAP with IEEE 802.3 frames.
SAP Interval	Time interval (in seconds) that the HP Jetdirect print server waits to send SAP messages,
	which are broadcast to advertise its service capabilities on a Novell NetWare network. The
	default is 60 seconds. Enter zero (0) to disable.
Print Server Name	NetWare printer name for the HP Jetdirect print server. The default name is NPIxxxxxx,
	where xxxxxx are the last six digits of the HP Jetdirect print server's LAN hardware (MAC)
	address.
NDS Tree Name	Name of the NDS tree for this device. Refers to the name of the organizational tree used by
	your network. To disable NDS support, leave the field blank.
NDS Context	NDS container or organizational unit that contains the print server object. Print queue and
	device objects can be located anywhere within the NDS tree, but the HP Jetdirect print
	server must be configured with the fully qualified print server object name.
	For example, if the print server object is found in the container “marketing.mytown.lj”, the
	fully qualified print server context name (CN) is:
	“OU=marketing.OU=mytown.O=lj”
	In the example, OU is an organization unit container and O is an organization container
	within the NDS tree. The print server also accepts “marketing.mytown.lj”.
	To disable NDS support, leave the field blank.
	NOTE: You cannot create NDS objects using the HP Embedded Web Server.
Job Poll Interval	Time interval in seconds that the HP Jetdirect print server waits to check for print jobs in a
	print queue.
PJL Configuration	Set the printer job language (PJL) parameters. Select or clear the check box to enable or
	disable the following:
	● Banner Page Print separator pages between print jobs.
	● End-Of-Job Notification Forward an end-of-job message to a client application (if
	received from the printer).
	● Toner Low Notification Forward a toner low message to a client application (if
	received from the printer).

AppleTalk

Use the AppleTalk tab to configure selected settings on the HP Jetdirect print server. For a description of the items, see Table 4-11AppleTalk tab settings on page 83.

82 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx) ENWW