HP 640n Print Server manual TCP/IP Diagnostics

Table 3-3Telnet Commands and Parameters (continued)

default-ip-dhcp	Periodically transmit DHCP requests when a legacy default IP address of 192.0.0.192 or
	a link-local IP address of 169.254.x.x is automatically assigned.
	0: Disable DHCP requests.
	1 (default): Enable DHCP requests.
duid	DHCP unique identifier for a client, using a hexadecimal string to represent up to 260
	characters.
dns-cache-ttl	Time-to-live for a cached DNS name, in seconds. Set from 0 to 4294967295 seconds.
	Names are not cached. 0: Disable.
dhcp-arbitration	Amount of time, in seconds, that the print server waits for DHCP configuration offers.
	Set from 1 to 10 seconds.
	0: Disable.
	5 (default): Enable.
stateless-dhcpv4	Allow automatic configuration of additional IP parameters from a DHCPv4 server even
	when the print server is statically configured (such as a manually configure IP address,
	subnet mask and default gateway).
	0 Disable.
	1 (default): Enable.
TCP/IP Diagnostics
Last Config IP	(Read-only parameter.) IP address of the system from which the HP Jetdirect print
	server's IP address was configured.
TCP Conns Refused	(Read-only parameter.) Number of client TCP connections that are refused by the print
	server.
TCP Access Denied	(Read-only parameter.) Number of times that client systems were denied access to the
	print server because the print server's host access list does not contain an allowable
	entry.
DHCP Lease Time	(Read-only parameter.) DHCP IP address lease duration time (seconds).
DHCP Renew Time	(Read-only parameter.) DHCP T1 timeout, specifying the DHCP lease renewal time in
	seconds.
DHCP Rebind Time	(Read-only parameter.) DHCP T2 timeout, specifying the DHCP lease rebind time in
	seconds.
SNMP
snmp-config	SNMP operation on the print server.
	CAUTION: Disabling SNMP disables all SNMP agents (SNMP v1, v2, v3) and
	communications with management applications, such as HP Web Jetadmin. In addition,
	firmware upgrades through current HP downloading utilities is disabled.
	0: Disable.
	1 (default) Enable.
get-cmnty-name	Optional. Password to determine which SNMP GetRequests the HP Jetdirect print
	server responds to. If a Get community name is set, the print server responds to either a
	user-specified community name or the factory-default. Enter up to 255 alphanumeric
	characters.

54 Chapter 3 TCP/IP configuration ENWW