Other Settings
Use this tab to provide access to a variety of management and printing configuration options. The following tabs are discussed:
●Misc. Settings on page 85 Enable miscellaneous advanced protocols and functions
●Firmware Upgrade on page 87 Update your HP Jetdirect print server with new features and enhancements
●LPD Queues on page 87 Set up print queues used in printing with line printer daemon (LPD) printing services
●Support Info on page 90 Set up the Support link located under Other Links in the left margin
●Refresh Rate on page 90 Set the time interval (in seconds) for HP Embedded Web Server diagnostic page updates
Misc. Settings
Use the Misc. Settings tab to set a variety of advanced protocols and features, as described in Table
Table 4-13 Miscellaneous Settings
Item | Description |
|
|
SLP Config | Enable SLP, which is used by certain client application software to automatically |
| discover and identify the HP Jetdirect print server. |
| If SLP uses multicast protocols, you must enable Multicast IPv4. |
|
|
Telnet Config | Use Telnet to access to HP Jetdirect configuration parameters. For more information, |
| see TCP/IP configuration on page 15. |
|
|
Bonjour | Use Bonjour services (formerly listed as Multicast Domain Name System [mDNS] |
| services). Bonjour is typically used for IP address and name resolution (through UDP |
| port 5353) where a conventional DNS server is not used. |
| For Bonjour operation, you must enable Multicast IPv4. |
|
|
Multicast IPv4 | Use the receipt and transmission of IP version 4 multicast packets by the print server. |
| NOTE: If disabled, other protocols that use multicast protocols, such as Bonjour and |
| SLP, might also be disabled. |
|
|
9100 Config | Use port 9100 services. This is an |
| print server and is the default port for printing. It is accessed by HP software, such as |
| the HP Standard Port. |
|
|
FTP Printing | Use FTP services available on the HP Jetdirect print server for printing. For more |
| information, see FTP printing on page 175. |
|
|
LPD Printing | Use LPD services on the HP Jetdirect print server. LPD provides line printer spooling |
| services for TCP/IP systems. For more information, see LPD printing on page 165. |
|
|
IPP Printing | Use IPP on the HP Jetdirect print server. If the printer is properly connected and |
| accessible, IPP allows printing to this device over the Internet (or intranet). A properly |
| configured IPP client system is also required. For information on IPP client software, see |
| HP software solutions summary on page 7. |
|
|
HP XML Services | Allow access by HP Web service applications to |
| print server. |
|
|
ENWW | Networking tab 85 |
