HP 640n Print Server manual 165

Table 8-13Error messages (continued)

Error Code and Message	Description
1E FAIL RESERVING PRINTER	The SPX connection to the print server was lost when the HP Jetdirect print server
NUM	attempted to reserve the printer number. Can indicate a network or print server
	problem. Verify all cables and routers are functioning correctly. Try restarting the print
	server.
1F ERR NEGOTIATING BUFFER	Failure detected when selecting the buffer size to use when reading print data from
SIZE	the file server. Can indicate a network problem.
	When the HP Jetdirect print server is configured for multiple file servers, the error is
	displayed on the configuration page only if none of the file servers successfully
	connected.
20 UNABLE TO LOGIN	Failure detected when the HP Jetdirect print server tried to log onto the file server.
	Can be caused if the print server object does not exist on the file server, or when a
	security check prevents the print server from logging in.
	Verify the file server name and print server object name are correct. Use PCONSOLE
	to erase the print server object password, and create a new print server object.
	When the HP Jetdirect print server is configured for multiple file servers, the error is
	only displayed on the configuration page if none of the file servers made the
	connection.
21 UNABLE TO SET PASSWORD	Failure detected when the print server tried to set the print server object password. (If
	the HP Jetdirect print server is able to log in without a password, it sets the password
	automatically.) Indicates a networking or security problem. Create a new print server
	object.
	When multiple file servers are configured, the error is displayed on the configuration
	page only if none of the file servers successfully connected.
22 UNABLE TO CONNECT TO	Queue server mode error. Print server could not establish an NCP connection to the
SERVER	file server. Verify the correct file servers are connected.
	When multiple file servers are configured, the error is only displayed on the
	configuration page if none of the file servers successfully connected.
23 UNABLE TO ATTACH TO	Failure detected when the HP Jetdirect print server tried to attach to one of the
QUEUE	queues assigned to the print server object. Can occur if no servers are allowed to
	attach to this queue, or if there is a networking or security problem. Use PCONSOLE
	to verify servers can attach to the queue, to delete the print server object from the list
	of queue servers (to have the the HP Jetdirect print server service other queues), or
	to delete the queue and create a new one (add the print server object to the list of
	queue servers).
	When the HP Jetdirect print server is configured for multiple file servers, the error is
	only displayed on the configuration page if none of the file servers made the
	connection.
24 PSERVER CLOSED	The NetWare print server requested a termination of the connection with the
CONNECTION	HP Jetdirect print server. No error exists or is indicated. Verify the NetWare print
	server is running, and restart it if necessary.
25 DISCONNECTING - SPX	The SPX connection to the print server was lost after the connection was made.
TIMEOUT	Indicates a possible network or print server problem. Verify all cables and routers are
	functioning correctly. Restart the print server.
26 UNKNOWN NCP RETURN	Print server encountered an unexpected fatal error after successfully connecting to
CODE	the file server. A number of failures could produce this error message, including a
	downed file server or a network router failure.
27 UNEXPECTED PSERVER DATA	The HP Jetdirect print server received data without providing permission. Indicates a
RCVD	possible print server or software problem.

ENWW HP Jetdirect configuration page 155