HP 640n Print Server manual Menu Interface, Web JetAdmin URL, Web JetAdmin Name, Support-contact

Table 3-3Telnet Commands and Parameters (continued)

status-page-lang	Printer job language (PJL) that the print server uses to send the HP Jetdirect
	configuration/status page to the printer.
	● Auto (default): PJL is auto-detected when the print server is turned on or after a
	cold reset.
	● PCL: HP Printer Control Language
	● ASCII: Standard ASCII characters
	● HPGL2: HP graphics language (v2)
	● PS: Postscript language
Support
Web JetAdmin URL	(Read-only parameter.) If HP Web Jetadmin discovers this device, the URL to access
	HP Web Jetadmin is specified.
Web JetAdmin Name	(Read-only parameter.) If HP Web Jetadmin discovers this device, the name of the
	HP Web Jetadmin host is specified (if known).
support-contact	Name of a person to contact for support of this device.
support-number	Phone or extension number to call for support of this device.
support-url	Web URL address for product information on this device over the Internet or an intranet.
tech-support-url	Web URL address for technical support over the Internet or an intranet.

Menu Interface

An optional Menu interface is displayed when you type the menu command during a Telnet session with the HP Jetdirect print server. The Menu interface provides structured menu lists for easy access to configuration parameters.

Figure 3-1 Example: Using the Menu Interface on page 60 illustrates the Menu interface, using the TCP/IP menus as an example.

●From the Main Menu screen, select and enter a menu number. If there are submenus, select and enter a submenu number.

●To change a setting, enter Y (for Yes) when prompted.

Edit the setting, using the Backspace key. If you enter an unrecognized value, the correct entry options are displayed.

NOTE: Changes are not saved on the HP Jetdirect print server until you exit a menu and choose to save your changes.

ENWW IPv4 configuration 59