HP 640n Print Server manual IPsec, Firewall, Admin Password, Cert Expires, Snmp Versions

Table 8-4 Security Settings (continued)

Message	Description
IPsec	If the print server and printer/MFP device supports IPsec, then IPsec appears. If
or	IPsec is not supported, then Firewall appears.
	Current IPsec/Firewall status.
Firewall
	Enabled IPsec/Firewall is enabled and operating as configured.
	Disabled IPsec/Firewall is turned off.
	Policy Failed Print server failed to implement the selected IPsec policy. You might
	need to reset security (control panel or the HP Embedded Web Server), or perform a
	cold reset.
Admin Password	IP Administrator password is set on the print server. This password is shared by
	Telnet, the HP Embedded Web Server, and HP Web Jetadmin to control access to
	print server configuration parameters. (Consists of up to 16 alphanumeric characters.)
	Not Specified Password not set.
	Set Password is set.
	Clear the password, using a cold reset.
Cert Expires	Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in
	UTC format (for example, “2012-10-02 12:45 UTC”).
	Not Applicable Digital certificate is not installed.
SNMP Versions	SNMP versions enabled on the print server.
	Disabled All SNMP versions disabled. No SNMP access is allowed.
	1;2 SNMP v.1 and SNMP v.2c supported. SNMP v.3 is disabled, or not supported.
	1;2;3-na/npSNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum
	security of no authentication (na) and no privacy (np).
	1;2;3-a/npSNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
	of authentication enabled (a) but no privacy (np).
	1;2;3-a/pSNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
	of authentication (a) with privacy (p) enabled.
	3-na/npSNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
	of no authentication (na) and no privacy (np).
	3-a/npSNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
	of authentication enabled (a) but no privacy (np).
	3-a/pSNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of
	authentication (a) with privacy (p) enabled.
SNMP Set Cmty Name	SNMP set community name is configured on the HP Jetdirect print server. An SNMP
	set community name is a password for write access to SNMP control functions
	(SNMP SetRequests) on the HP Jetdirect print server.
	Not Specified SNMP set community name is not set.
	Specified User-specified SNMP set community is set.
SNMP Get Cmty Name	SNMP get community name is configured on the HP Jetdirect print server. This is a
	password to determine which SNMP GetRequests the HP Jetdirect print server
	responds to. If a Get community name is set, the print server responds to either a
	user specified community name or the factory-default.

ENWW HP Jetdirect configuration page 145