| 0: ARP/RARP frames where the hardware address space is |
| equal to Ethernet (1) must not match this entry. |
| 1: ARP/RARP frames where the hardware address space is |
| equal to Ethernet (1) must match this entry. |
| Any: Any value is allowed. |
Ethernet | Specify whether frames can hit the action according to |
| their ARP/RARP protocol address space (PRO) settings. |
0:ARP/RARP frames where the protocol address space is equal to IP (0x800) must not match this entry.
1:ARP/RARP frames where the protocol address space is equal to IP (0x800) must match this entry.
Any: Any value is allowed.
zChoose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page. If you choose ICMP as IP Protocol Filter, you will get the page as the following:
Source IP | Specify the Source IP filter for this ACE. |
| Any: No source IP filter is specified. |
| Host: Source IP filter is set to Host. Specify the source IP |
| address in the Source IP Address field that appears. |
| Network: Source IP filter is set to Network. Specify the |
| source IP address and source IP mask in the Source IP |
| Address and Source IP Mask fields that appear. |
Source IP Address | Type the Source IP Address here. This option is available |
| when you choose Host or Network as Source IP. |
Source IP Mask | Type the Source IP Mask here. This option is available |
| only when you choose Network as source Source IP. |
154 | Vigor2750 Series User’s Guide |
