Vigor2750 Series User’s Guide 131
Router Name Type the name of the router.
Domain Name Type the domain name obtained from the ISP.
When PPPoE is selected as connection type, you need to configure the following settings:
Username Type the name obtained from the ISP.
Password Type the password obtained from the ISP.
Confirm Password Type the password again for confirmation.
MTU Size It means Max Transmit Unit for packet. The default setting
is 1442.
After finishing all the settings here, please click OK to activate them.
4
4.
.2
2.
.3
3
3
3G
G
B
Ba
ac
ck
ku
up
p
This page is used to setup 3G backup function. If you enable 3G backup, make sure your
WAN connection type is not in 3G mode. When the WAN connection is broken, router will
try to keep the connection with 3G mode. After WAN connection is recovered, router will
disconnect the 3G connection automatically.
SIM PIN code Type PIN code of the SIM card that will be used to access
Internet.