Draytek 2750 manual LAN to LAN, Name, Tx /Rx

4.8.5 LAN to LAN

Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles. You may set parameters including specified connection peer IP, connection type and corresponding security methods, etc.

The router supports 2 VPN tunnels simultaneously and provides up to 2 profiles. The following figure shows the summary table.

Name	Indicate the name of the LAN-to-LAN profile.
Endpoint	Display the IP address of the VPN client.
IKE Alg	Display the encryption and authentication algorithm used
	during phase 1 of the VPN connection Establishment. The
	algorithm is used during exchange of key exchange.
ESP Alg	Display the encryption and authentication algorithm used
	during phase 2 of the VPN connection Establishment. This
	algorithm is used for transporting data, and the choice will
	affect the performance of the VPN tunnel.
Tx /Rx	Display the incoming and outgoing packets information for
	such tunnel.
Up Time	Display the connection time for such VPN tunnel.

Vigor2750 Series User’s Guide 185