Draytek 2750 manual UDP port number that the Radius server is using

WPA Algorithm Select TKIP, AES or auto as the algorithm for WPA.

WPA Pre-Shared Key	Either 8~63 ASCII characters, such as 012345678..(or 64
	Hexadecimal digits leading by 0x, such as
	"0x321253abcde...").

zWPA-RADIUS

The built-in RADIUS client feature enables the router to assist the remote dial-in user or a wireless station and the RADIUS server in performing mutual authentication. It enables centralized remote access authentication for network management.

Type	The WPA encrypts each frame transmitted from the radio
	using the key, which either PSK (Pre-Shared Key) entered
	manually in this field below or automatically negotiated
	via 802.1x authentication. Select WPA, WPA2 or Auto as
	WPA mode.

WPA Algorithm Choose the WPA algorithm, TKIP, AES or Auto.

Server IP Address	Enter the IP address of RADIUS server.
Destination Port	The UDP port number that the RADIUS server is using.
	The default value is 1812, based on RFC 2138.
Shared Secret	The RADIUS server and client share a secret that is used
	to authenticate the messages sent between them. Both
	sides must be configured to use the same shared secret.

zWPS

WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point (vigor router) with the encryption of WPA and WPA2.

Vigor2750 Series User’s Guide 193