![](/images/new-backgrounds/1192228/192228479x1.webp)
4.13.8 Management
This page allows you to manage the settings for access control, access list, port setup, and SMP setup. For example, as to management access control, the port number is used to send/receive SIP message for building a session. The default value is 5060 and this must match with the peer Registrar when making VoIP calls.
Enable | Enable the checkbox to allow system administrators to |
HTTP/HTTPS/SSH/ICMP | login from the Internet. There are several servers |
Ping/FTP/TELNET | provided by the system to allow you managing the router |
| from Internet. Check the box(es) to specify. |
Enable SNMP | Check it to enable such service. |
| Manager Host IP – Set one host as the manager to |
| execute SNMP function. Type the IP address to specify |
| the certain host. |
Access List | You could specify that the system administrator can only |
| login from a specific host or network defined in the list. |
| A maximum of three IPs/subnet masks is allowed. |
| List IP - Indicate an IP address allowed to login to the |
| router. |
| Subnet Mask - Represent a subnet mask allowed to login |
| to the router. |
230 | Vigor2750 Series User’s Guide |