Security | There are four types for security, Disabled, WEP, TKIP |
| and Key or Peer Mac Address field valid or not. Choose |
| one of the types for the router. Please disable the unused |
| link to get better performance. |
Key | Type 8 ~ 63 ASCII characters or 64 hexadecimal digits |
| leading by “0x”. |
Peer Mac Address | Four peer MAC addresses are allowed to be entered in this |
| page at one time. |
Phy Mode | There are three types of transmission rates developed by |
| different techniques for Phy Mode. Data will be transmitted |
| via communication channel. |
| CCK – If 802.11b wireless mode is used, please choose |
| such type as the Phy Mode. |
| OFDM – If 802.11g wireless mode is used, please choose |
| such type as the Phy Mode. |
| HTMIX – If 802.11b/g/n wireless mode is used, please |
| choose such type as the Phy Mode. |
| Both clients (local and remote) must use the same Phy |
| Mode to have the same transmission rate. |
OK | Click this button to save the configuration. |
3.8 USB Application
USB diskette can be regarded as an FTP server. By way of Vigor router, users on LAN/WAN can access, write and read data stored in USB diskette. After setting the configuration in USB Application, you can type the IP address of the Vigor router and username/password created in User>>User Configuration on the FTP client software. Thus, the client can use the FTP site (USB diskette) through Vigor router.
3.8.1 USB General Settings
At present, the Vigor router can support USB diskette with versions of FAT16 and FAT32 only. Therefore, before connecting the USB diskette into the Vigor router, please make sure the memory format for the USB diskette is FAT16 or FAT32. It is recommended for you to use FAT32 for viewing the filename completely (FAT16 cannot support long filename).
90 | Vigor2750 Series User’s Guide |
