Draytek 2750 manual 11.5 IPv6 Neighbour, 11.6 IPv6 Tspc Status

Hoplimit	Display the number of network segments on which the
	packet is allowed to travel before discarded.
Auto-refresh	Check this box to enable an automatic refresh of the page
	at regular intervals.

4.11.5 IPv6 Neighbour

IPv6 uses neighbor discovery protocol to find out neighbors on the same link.

Device	The interface name of the link where the neighbor is on.
IP Address	The IPv6 address of the neighbor.
MAC Address	The link-layer address of the neighbor.
State	Possible states include:
	incomplete - address resolution is in progress.
	reachable - neighbor is reachable.
	stale – neighbor(s) may be unreachable but not verified
	until a packet is sent).
	delay - neighbor may be unreachable and a packet was sent.
	probe - neighbor may be unreachable and probes are sent
	to verify the reachability.
Auto-refresh	Check this box to enable an automatic refresh of the page
	at regular intervals.

4.11.6 IPv6 TSPC Status

IPv6 TSPC status web page could help you to diagnose the connection status of TSPC. TSPC log contains some debug information from program.

If TSPC has not configured properly, the router will display the following page when the user tries to connect through TSPC connection.

Vigor2750 Series User’s Guide 215