Draytek 2750 manual Click this button to close the function of limit bandwidth

To activate the function of limit bandwidth, simply click Enable and set the default or user-defined upstream and downstream limit.

Disable	Click this button to close the function of limit bandwidth.
Enable	Click this button to activate the function of limit bandwidth.
Smart Bandwidth Limit	Click this radio button to configure the default limitation for
	bandwidth.
	When session number exceeds – type the value here as a
	threshold to apply the smart bandwidth limit.
	TX limit - Define the default speed of the upstream for
	each computer in LAN.
	RX limit - Define the default speed of the downstream for
	each computer in LAN.
User-defined Bandwidth	Click this radio button to configure the user-defined
Limit	limitation for bandwidth.
	Limitation List - Display a list of specific limitations that
	you set on this web page.
	Start IP - Bandwidth limit can be applied on certain IP
	range. That’s, only the PCs within the range will be
	influenced by the bandwidth limitation set here. Please
	define the start IP address for the specific limitation.
	End IP - Define the end IP address for the specific
	limitation.
	TX Limit - Define the limitation for the speed of the
	upstream to be applied as specific limitation. If you do not
	set the limit in this field, the system will use the default
	speed for the specific limitation you set for each index.
	RX Limit - Define the limitation for the speed of the
	downstream to be applied as specific limitation. If you do
	not set the limit in this field, the system will use the default
	speed for the specific limitation you set for each index.
	Add - Add the specific speed limitation onto the list above.
	Edit - Allows you to edit the settings for the selected
	limitation.
	Delete - Remove the selected settings existing on the
	limitation list.

When you finish adding a new bandwidth limit, simply click OK.

164 Vigor2750 Series User’s Guide