Draytek manual For Vigor2750Vn, Interface

1.2.3 For Vigor2750Vn

LED		Status	Explanation
ACT		Blinking	The router is powered on and running
(Activity)			normally.
		Off	The router is powered off.
HPA		On	Hardware NAT is enabled.
(Hardware		Off	Hardware NAT is disabled.
Packet
Accelerate)
DSL		On	The DSL port is connected.
		Blinking	The router is ready.
		(Slowly)
		Blinking	The connection is training.
		(Quickly)
LAN1/2/3/4		On	The port is connected with 1000Mbps.
		(Green)
		Blinking	The data is transmitting.
		(Green)
		On	The port is connected with 100Mbps.
		(Orange)
		Blinking	The data is transmitting.
		(Orange)
USB1/2	On		A USB device is connected and active.
Phone1/		On	The phone connected to this port is
Phone2			off-hook.
		Off	The phone connected to this port is
			on-hook.
		Blinking	A phone call comes.
WLAN	On		Wireless access point is ready.
WPS Button		On	Press this button for 2 seconds to wait
			for client device making network
			connection through WPS. When the
			LED lights up, the WPS connection
			will be on.
		Off	The WPS is off.
Interface		Description
WLAN		Press the button once to enable (WLAN LED on) or
		disable (WLAN LED off) wireless connection.
DSL	Connector for accessing the Internet.
LAN (1-4)		Connectors for local network devices.
USB (1-2)	Connector for USB storage device (Pen
		Driver/Mobile HD) or printer or 3G backup.

6 Vigor2750 Series User’s Guide