![](/images/new-backgrounds/1192228/192228239x1.webp)
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
| If the connected CPE does not need to be authenticated |
| please set URL as the following: |
| http://{IP address of |
| VigorACS}:8080/ACSServer/services/UnAuthACSServ |
| let |
| Username/Password - Type username and password for |
| ACS Server for authentication. For example, if you want |
| to use such CPE with VigorACS, you can type as the |
| following: |
| Username: acs |
| Password: password |
CPE Settings | Such information is useful for Auto Configuration |
| Server. |
| Check /Uncheck Enable – Allow/Deny the CPE |
| Client to connect with Auto Configuration Server. |
| Port – Sometimes, port conflict might be occurred. |
| To solve such problem, you might change port |
| number for CPE. |
Periodic Inform Settings | Uncheck Enable – The system will not send inform |
| message to ACS server. |
| Check Enable – The system will send inform message to |
| ACS server periodically (with the time set in the box of |
| interval time). |
| The default setting is Enable. Please set interval time or |
| schedule time for the router to send notification to CPE. |
| Or click Disable to close the mechanism of notification. |
3.11.3 User Password
This page allows you to set new password for user operation.
Old Password | Type in the old password. The factory default setting for |
| password is blank. |
New Password | Type in new password in this filed. |
Confirm New Password | Type in the new password again. |
When you click OK, the login window will appear. Please use the new password to access into the web configurator again.
110 | Vigor2750 Series User’s Guide |