Destination Address | Display the destination address of the static route. |
Status | Display the status of the static route. |
Add | Click it to add a new static route. |
Add Static Routes to Private and Public Networks
Here is an example of setting Static Route in Main Router so that user A and B locating in different subnet can talk to each other via the router. Assuming the Internet access has been configured and the router works properly:
zuse the Main Router to surf the Internet.
zcreate a private subnet 192.168.10.0 using an internal Router A (192.168.1.2)
zcreate a public subnet 211.100.88.0 via an internal Router B (192.168.1.3).
zhave set Main Router 192.168.1.1 as the default gateway for the Router A 192.168.1.2.
Before setting Static Route, user A cannot talk to user B for Router A can only forward recognized packets to its default gateway Main Router.
1.Click the LAN - Static Route and click Add. Check the Enable box. Please add a static route as shown below, which regulates all packets destined to 192.168.10.0 will be forwarded to 192.168.1.2. Click OK.
Vigor2750 Series User’s Guide | 141 |
