Adding a New Rule
Click Add New Rule to configure a new rule for IPv6 Firewall.
Note: You can set up to 20 sets of IPv6 rules.
Name | Type a name for the rule. |
Protocol | Specify a protocol for this rule. |
Source IP Type | Determine the IP type as the source. |
Source IP | Type the IP address here if you choose Single as Source |
| IP Type. |
Source Subnet | Type the subnet mask here if you choose Subnet as |
| Source IP Type. |
Destination IP Type | Determine the IP type as the destination. |
Destination IP | Type the IP address here if you choose Single as | |
| Destination IP Type. |
|
| 212 | Vigor2750 Series User’s Guide |
