IBM WORKPADC3 manual Using the onscreen contrast control

Scroll	Displays text and other information that extends
button	beyond the area of the WorkPad c3 companion
	screen. Pressing the lower half of the scroll button
	scrolls down to view information below the viewing
	area, and pressing the upper half of the button scrolls
	up to view the information above the viewing area.
Contrast	Turns on the onscreen contrast control so you can
control	adjust the screen for the clearest screen display as
button	required by the lighting conditions or temperature of
	the environment where you use your companion. See
	“Using the onscreen contrast control” later in this
	chapter for more information.
Power	Turns your WorkPad c3 companion on or off and
button	controls the backlight feature. If your WorkPad c3
	companion is turned off, pressing the power button
	turns the unit on and returns you to the last screen
	you viewed.
	If your WorkPad c3 companion is turned on, pressing
	the power button turns the unit off. Holding the
	power button down for about two seconds turns the
	backlight on or off.

Using the onscreen contrast control

Even with the backlight on, you may need to make further adjustments by changing the amount of contrast on the screen.

To adjust the contrast:

1.Press the Contrast control button.

2.To change the contrast in small increments, tap to the left or right of the slider.

To change the contrast in larger increments, drag the slider to the left or right.

Tip: You can also press the scroll button to move the slider incrementally.

3. Tap Done.

Page 6 Introducing Your WorkPad c3 Companion