IBM WORKPADC3 manual Adding details to e-mail items

Tap to select

Tap here to enter address in field

Adding details to e-mail items

Before you send your e-mail item, you can attach additional attributes to it, such as a signature or a priority level. These features are dependent on the desktop E-mail application you use. If your application does not support the attribute you select, your companion cannot attach that attribute to the e-mail item.

The following details are available:

Priority	Flags an e-mail item as High, Normal, or Low
	priority.
BCC	Creates a blind carbon copy field in the New
	Message screen.
Signature	Attaches previously defined text as the closing of an
	e-mail item. See “Adding a signature to your e-mail
	item” later in this chapter.
Confirm	Requests a confirmation telling you when the
Read	e-mail item was read.
Confirm	Requests a confirmation telling you when the
Delivery	e-mail item was delivered.

Note: The Priority and BCC settings are valid only for the current e-mail item and must be set for each item you create.

Chapter 5 Page 119