Area Requirements, Electrical Requirements

5.Turn on main water supply. Check for leaks. Turn saddle valve handle counterclockwise and run water through copper tubing and into a bucket. Turn saddle valve clockwise to shut off water to copper tubing.

6.Route copper tubing to refrigerator area or water filter area.

7.Leave an additional length of copper tubing coil to facilitate moving the refrigerator out of enclosure for cleaning or service.

8.See page11 for water connection instructions.

AREA REQUIREMENTS

Verify the following:

•Refrigerators can fit into residence and can be moved around corners and through doorways. •Floors can support refrigerator’s weight plus food weight (approximately 1200 pounds each).

•Rear wall is solid and is able to support a (2) horizontally mounted 2X4s (included) bolted to 2 wall studs. The 2X4 board bolt heads must be flush with 2X4 to prevent obstruction.

•Remove anything attached to rear or side walls that can obstruct refrigerator opening. •Cutout dimensions are accurate.

•Electrical outlet is in correct location. •Water line in in correct location.

ELECTRICAL REQUIREMENTS

ELECTRICAL SHOCK HAZARD Plug into a grounded 3-prong outlet.

DO NOTremove ground plug. DO NOT use an adapter.

DO NOT use an extension cord.

Failure to follow these instructions could result in fire or electrical shock.

If codes permit a separate grounding wire to be used, it is recommended that a qualified electrician determine that the grounding path is adequate. Do Not ground to a gas pipe. Check with a qualified electrician if you are not sure the appliance is properly grounded. Do Not have a fuse in the neutral or grounding circuit.

It is the customer’s responsibility to: •contact a qualified electrical installer.

•assure that the electrical installation is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or Canadian Electrical Code C22.1-1998 and C22.2 No. 0-M91 (or latest edition), and all local codes and ordinances. 120 volt, 60-Hz, 15 amp, fused, electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong, grounding-type wall receptacle. Do not use an extension cord.

Anti-Tip Requirements

The anti-tip boards should be fastened into position prior to moving the unit into the opening.

Note: The space between the rear of the refrigerator cabinet and the condensing unit assembly housing is 1 1/2” (3.8 cm) deep. Additional mounting boards may be required if the refrigerator does not touch the back wall of the enclosure

TIP OVER HAZARD

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator. Failure to do so can result in death or serious injury

BRTGK72SS specifications

The Viking BRTGK72SS is a premium battery-powered lawn mower designed for superior performance and eco-friendly operation. Featuring a robust 72V lithium-ion battery system, this model delivers impressive cutting power and extended runtime, making it suitable for both residential and commercial mowing tasks.

One of the standout features of the Viking BRTGK72SS is its innovative brushless motor technology. This motor not only provides more torque and efficiency compared to traditional brushed motors but also reduces wear and tear, ensuring a longer lifespan for the equipment. The result is a smooth and quiet mowing experience, which is both pleasant for the user and less disruptive to the environment.

The cutting deck of the BRTGK72SS is constructed from high-quality stainless steel, ensuring durability and resistance to rust and corrosion. With a generous 20-inch cutting width, this mower can tackle larger lawns quickly while providing a clean and precise cut. The model is equipped with a three-in-one cutting system, allowing users the option to mulch, bag, or discharge clippings, providing versatility for different lawn care preferences.

Ergonomics is another critical design consideration in the Viking BRTGK72SS. The adjustable handlebar is designed for comfort and ease of use, reducing strain during longer mowing sessions. The mower also features easy-to-reach controls, which enhance the user experience by allowing for quick adjustments without interrupting the workflow.

In terms of technology, the Viking BRTGK72SS incorporates smart features such as a battery management system that monitors the battery's health and performance. This technology maximizes efficiency and extends the battery life, ensuring that users get the most out of each charge. Additionally, the mower is equipped with LED indicators that display battery levels and operational status, providing users with real-time information about the mower's performance.

Safety is paramount in the design of the Viking BRTGK72SS, which includes features such as an automatic shut-off when the user releases the handlebar, preventing accidents caused by inadvertent operation.

With its combination of power, efficiency, and thoughtful design, the Viking BRTGK72SS is an excellent choice for anyone looking for a high-performance battery-powered lawn mower that prioritizes both user experience and environmental responsibility. Whether you're a homeowner or a professional landscaper, this mower stands out as a capable and reliable tool for maintaining a pristine lawn.