Water Supply Requirements, Plumbing Dimensions

WATER SUPPLY REQUIREMENTS

ELECTRICAL SHOCK HAZARD Some water may remain in line. Electric drill must be grounded to prevent severe or lethal shock if water is in line and enters drill during use.

Use only 1/4” (6 mm) copper tubing for water line. Do Not install copper tubing in area where temperatures drop below 35oF (1.7oC). Before attaching copper tubing to refrigerator, flush at least 2 quarts (1.9 L) of water through the copper tubing and into a bucket to get rid of any particles in the water line.

•Connect 1/4” (6mm) flexible copper tubing to household plumbing in compliance with local codes and ordinances. •Length of copper tubing must reach from water supply connection to refrigerator connection plus an additional length to facilitate moving the refrigerator out of enclosure for cleaning or service. Tubing should be soft instead of rigid and

ends should be free of burrs.

•Copper tubing route must be above 35oF (1.6oC) to prevent water line from freezing.

•If saddle valve is not used, place a separate shut-off valve in an easily accessible location between water supply and refrigerator. Do not locate shut-off valve behind refrigerators.

•Do not use plastic water lines.

•Do not use self-piercing valve. Viking Range Corporation is not responsible for property damage due to improper installation or water connection.

•Do not use with reverse osmosis water filtration system. This will void warranty

•Connect a vertical or horizontal 1/2” (1.2 cm) to 1 1/4” (3.2 cm) COLD water line near refrigerator area.

•Run water line through the floor, back or side wall. Tubing should lay flat on floor underneath refrigerator. Clamp tubing to wall or floor.

•Water pressure must be greater than 20 psi and less than 120 psi.

Plumbing Dimensions

To rough in water line:

1.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

2.Vertical cold water line: Use grounded electric drill or hand drill to drill 3/16” (4.5 mm) hole in an easily accessible location in water line.

Horizontal cold water line: Use grounded electric drill or hand drill to drill 3/16” (4.5 mm) hole in the TOP of the water line. This will keep sediment from

collecting in valve.

3. Position washer over hole in water line. Place both halves of saddle valve bracket against water line. turn saddle valve handle clockwise until firmly seated. The saddle valve is now in the closed position. Tighten packing nut. Evenly and firmly tighten bracket screws so washer will make a water-tight connection. Do not overtighten screws: copper tubing could be crushed.

4.Check that both ends of copper tubing are cut square. Slide compression nut and sleeve onto copper tubing. Insert end of copper tubing completely into

valve outlet. Tighten compression nut to outlet with adjustable wrench. Do not overtighten.

BRTGK72SS specifications

The Viking BRTGK72SS is a premium battery-powered lawn mower designed for superior performance and eco-friendly operation. Featuring a robust 72V lithium-ion battery system, this model delivers impressive cutting power and extended runtime, making it suitable for both residential and commercial mowing tasks.

One of the standout features of the Viking BRTGK72SS is its innovative brushless motor technology. This motor not only provides more torque and efficiency compared to traditional brushed motors but also reduces wear and tear, ensuring a longer lifespan for the equipment. The result is a smooth and quiet mowing experience, which is both pleasant for the user and less disruptive to the environment.

The cutting deck of the BRTGK72SS is constructed from high-quality stainless steel, ensuring durability and resistance to rust and corrosion. With a generous 20-inch cutting width, this mower can tackle larger lawns quickly while providing a clean and precise cut. The model is equipped with a three-in-one cutting system, allowing users the option to mulch, bag, or discharge clippings, providing versatility for different lawn care preferences.

Ergonomics is another critical design consideration in the Viking BRTGK72SS. The adjustable handlebar is designed for comfort and ease of use, reducing strain during longer mowing sessions. The mower also features easy-to-reach controls, which enhance the user experience by allowing for quick adjustments without interrupting the workflow.

In terms of technology, the Viking BRTGK72SS incorporates smart features such as a battery management system that monitors the battery's health and performance. This technology maximizes efficiency and extends the battery life, ensuring that users get the most out of each charge. Additionally, the mower is equipped with LED indicators that display battery levels and operational status, providing users with real-time information about the mower's performance.

Safety is paramount in the design of the Viking BRTGK72SS, which includes features such as an automatic shut-off when the user releases the handlebar, preventing accidents caused by inadvertent operation.

With its combination of power, efficiency, and thoughtful design, the Viking BRTGK72SS is an excellent choice for anyone looking for a high-performance battery-powered lawn mower that prioritizes both user experience and environmental responsibility. Whether you're a homeowner or a professional landscaper, this mower stands out as a capable and reliable tool for maintaining a pristine lawn.