6.) Press the 
or 
SKIP buttons to select the next track you wish to program.
Example: Track 18.
7.) Press the MEMORY button again to store the desired disc and track into memory location Number 02.
Repeat the above procedure until you have stored up to 40 tracks in the program memory and FULL flashes in Display.
After all your desired tracks are programmed you may press the MEMORY button to reconfirm that the information has been stored correctly. The display will show you which disc and track number you have entered into program memory Number 1.
Each time you press the MEMORY button the display will show you which disc number and track number is stored in each successive memory location.
Programmed Playback
After you have stored and confirmed the program information, press the PLAY/PAUSE 
button to begin programmed playback.
Playback will start at the first disc and track which you have programmed and will continue until all programmed discs and tracks.
Up to a total of 40 tracks have been played.
NOTE: If you press the 
or 
SKIP buttons during programmed playback, the player will skip forward or back to the next track and disc which you have programmed, not the next track on the disc which is being played.
To Clear The Program Memory
If the disc is playing, press the STOP 
button to stop the discs. Then press the STOP 
button again to clear the program memory.
19
MS9933TT_050304.p65 | 19 |
3/5/2004, 10:25