RESET Button
If the unit does not respond to commands from the remote control or from the front panel controls, the internal processor may be “locked” and must be reset. Use a paper clip or similar object to press the RESET button which is located inside a
RESET Pin Hole
Depress the RESET button for a few seconds to clear the memory and restore normal operation.
Notes:
1.) The system must be connected to an AC outlet in order to reset the internal processor.
2.) After clearing the memory you must
PHONES Jack
The Stereo Headphone Jack is located on the left front panel. Connect a set of stereo headphones (not included) to this jack for private listening without disturbing others. The speakers are automatically disconnected when headphones are connected to the headphone jack.
IMPORTANT: When using headphones always set the volume control to a low level before you put the headphones on. Then put the headphones on and gradually increase the volume to a comfortable listening level.
30
MS9933TT_050304.p65 | 30 |
3/5/2004, 10:25