Control Buttons and Display

ON/OFF Button and Memory (see figure 39)

To turn the display ON:

Press firmly on the ON/OFF button 2. Note: The digital carriage’s display 5 maintains a memory of the unit mode it was in when last turned off. When turned on, the display 5 will show the last measurement it was at when previously used. This memory is desirable because of the Automatic Shut Off feature (see below)

-when the fence is left at a preset position and the user turns the carriage back on to continue use. If the user wishes to start with the display 5 showing a zero measurement, then the RESET button will be used.

To turn the display OFF:

Press firmly and hold down on the ON/OFF button 2. To avoid accidentally turning the display off, the button needs to be held down for 2-3 seconds time. The system’s memory will remember the last mode and measurement when the display is turned off.

FIG. 39

5

 

 

3

2

4

Automatic Shut Off

There is an automatic shut off feature – this is included to

conserve battery life. If there is no activity by moving the digital FIG. 40 carriage or pressing any of the function buttons, the display will automatically shut off in approximately 1 minute.

NOTE: The digital carriage will remember the last measurement it was left at when the automatic shut off happens – to restart, press the ON/OFF button.

UNITS button (see figures 39 & 40)

The digital carriage will display one of 4 measurement modes – each mode uses a different unit of measurement:

1)1/32 INCH (fractional) mode – as the carriage moves, the display value increases or decreases by 1/32 of an inch

2)1/16 INCH (fractional) mode – as the carriage moves, the display value increases or decreases by 1/16 of an inch

3)INCH (decimal) mode - as the carriage moves, the display value increases or decreases by .01 (1/100 of an inch)

4)MM (decimal) mode - as the carriage moves, the display value increases or decreases by .5 (1/2 of a millimeter)

Each press on the UNITS button 3 will change the display 5 mode to another.

1/32 INCH mode

1/16 INCH mode

Decimal INCH mode

RESET button (see figures 39 & 40)

Pressing the RESET button 4 will bring the display down to a

 

zero value – this is normally used to “zero out” the display when

 

 

the fence is against the blade. Press firmly and hold down on

Decimal MM mode

the RESET button 4 to “zero out” the display 5. To avoid

 

accidentally resetting the display to zero, the button needs to be

 

held down for 2-3 seconds time.

 

1)1/32 INCH mode – display will show 0/32

2)1/16 INCH mode - display will show 0/16

3)INCH (decimal) mode - display will show .00

4)MM (decimal) mode - display will show .0

The display mode is controlled by the UNITS button setting.

50.

Page 49 Page 51
Page 50
Image 50
Bosch Appliances 4100DG, 4100-09 Control Buttons and Display, ON/OFF Button and Memory see figure, Automatic Shut Off
Page 49 Page 51

4100DG, 4100-09, 4100 specifications

Bosch Appliances 4100, 4100-09, and 4100DG are a series of highly regarded kitchen appliances designed to enhance efficiency and performance in home cooking. Bosch has a long-standing reputation for crafting high-quality products, and this series is no exception. Each model combines cutting-edge technology with sleek design to meet the needs of modern households.

A standout feature of the Bosch 4100 series is its powerful performance. These appliances come equipped with high-performance motors and advanced cooking capabilities that ensure consistent results. Whether baking, broiling, or roasting, users can expect even heat distribution and precise temperature control, which are critical for achieving culinary perfection.

The 4100 appliances also emphasize intuitive usability, featuring easy-to-navigate controls and thoughtful design. The models include user-friendly digital displays and simple button interfaces, making it easy for anyone, regardless of cooking experience, to operate them seamlessly. Additionally, the Bosch 4100 series is designed with a focus on safety, incorporating advanced systems that prevent overheating and ensure secure operation.

In terms of design, the Bosch 4100 models boast a streamlined aesthetic that blends well with any kitchen décor. Constructed from high-quality materials, they offer durability while exuding a modern, sophisticated look. The stainless-steel finishes not only add elegance but are also easy to clean and maintain, making them practical for everyday use.

Another noteworthy characteristic of the Bosch 4100 series is the energy efficiency standards they meet. These appliances are designed to utilize less energy without compromising performance, helping homeowners save on utility bills while minimizing their environmental footprint.

The 4100DG model specifically stands out for its dual-fuel capabilities, allowing users to harness the benefits of both gas and electric cooking methods. This versatility provides chefs with greater flexibility and precision, accommodating a variety of cooking styles and preferences.

Overall, Bosch Appliances 4100, 4100-09, and 4100DG exemplify craftsmanship and innovation in the kitchen appliance sector. Their combination of advanced technology, user-friendly features, and stylish designs make them an excellent choice for anyone looking to elevate their cooking experience and enhance their kitchen functionality.
Top Page Image Contents